Metallic Epoxy and anti-slip Floor Paint for workshop
VIT Epoxy floor coating is a two part, economic, coloured industrial epoxy resin floor paint for maintenance workshops, garages and loading ramps. This product is refined by imported epoxy resin, anti-yellowing curing agent, additives, and anti-yellowing color fillings.
Available in 18 kg. Available in most RAL or BS Colours
Mirror surface result and it is very smooth and beautiful
Resistance to acid, alkali, salt, chemical solvents, oil corrosion, especially strong alkali
Resistance to abrasion, pressure, impact with high hardness and elasticity
Resistance to weather
VIT Epoxy floor coating epoxy floor resin is designed for on concrete or screed surfaces. Generally for use on areas such as car park, garage or workshop floors, it delivers a superb gloss showroom finish to any concrete or screed surface.
VIT Epoxy floor coating is a two part epoxy resin
VIT Epoxy floor coating is a roller applied floor coating for concrete and cement screeds
Suitable for normal and medium to heavy wear areas
Suitable for storage areas and assembly halls, maintenance workshops, garages and loading ramps, etc.
Ideally suited for flooring in Food and Beverage establishments
Good chemical, mechanical and abrasion resistance
Slip resistant surface option
Theoretical coverage rate of 3.3 square metres to 4.0 square metres per kg per coat
Please read the Technical Data Sheet for full preparation and application instructions
Available in many RAL and British Standard Colours
The VIT Epoxy floor coating epoxy resin is designed to be rollered onto the concrete surface and gives a gloss finish. It is a popular choice for garages and industrial units throughout the country, as it delivers a superb protective coating. Suitable for parking lot, 4S work shop, public, and work shop for electric appliance, electronic, hardware, food, medicine, chemical industry, cloth, furniture, plastic, and stationery.
Surface and Environment
The VIT Epoxy floor coating epoxy resin is designed to be used on concrete or screed at temperatures of between 10 to 30 degrees celsius. The properties of this resin ensure a perfect gloss finish every time.
Coating area: 6 m2/kg
Time to dry: touch dry≤4 hours, hard dry≤12 hours
Construction ratio: Paint : Curing agent=100 : 50( weight ratio)
Roll, spray are ok
Storage: Kept in a cool and dry place. Avoid sun exposure or frost.
Q1: What should I do to the concrete floor before apply epoxy resin floor paint?
A1: Before applying epoxy floor paint, be sure to make the concrete floor smooth and flat, the surface must be clean,sound hard and free from loose particles,oil,grease and other contaminants. If it is old floor with cracks,holes,joints, it is required to repair and till dry.
Q2: Is there any special requirement on the substrate concrete condition?
A2: Yes, The concrete strenght must be above >C25 ; Flatness: the maximum altitude difference of 2M running rule must be <3mm The moisture content of the base must be <4%.
Q3: What is the requirement on the environment during application of epoxy floor paint?
A3: 1. The temperature should be no less than 10 celsius degree; 2. The moisture of air should be below 85% 3. Make sure the room is well ventilated during application.
Q4: How many layers of epoxy paint is it in your paint system?
A4: This is flexible. If your floor is new and smooth in good condition, generally 3 layers of epoxy paint would be enough;If your floor is old with cracks,joints,holes,etc,it is suggested to apply 4 layers of epoxy paint.
Q5: What is the thickness after application of epoxy floor paint?
A5: The general thickness is about 2mm for 4 layers.
Q6: How many days does it take to finish whole painting project?
A6: The re-coat time of each layer is usually 8 hours, namely you can finish one layer today,and tomorrow start another layer.So if you have experienced painters, it will take no more than one week if the floor area is below 5000 sqm.
Q7: When can I use the newly painted floor?
A7: After applying epoxy floor paint, you will need maintenance about 7~10 days, no people walk,no maching running.
Q8: Besides the epoxy paint,what else do I need to buy for application?
A8: You will need the related tools,such as roller, trowel, grinding machine,grinding disks,electrical mixing machine,etc. We can collect all the necessary accessory tools for you.
Factory directly sells with high quality and competitive price. We always satisfy our customers with good service and excellent products.
From production to shipping, we provide one-stop and great service all the time. High quality, competitive price, and timely delivery guaranteed.